What You Need to Know About Garmin AIS 600 Setup Software 38 and Its Features
Garmin Ais 600 Setup Software 38: A Complete Guide
If you are looking for a reliable and easy-to-use marine Automatic Identification System (AIS) Class B transponder device, you might want to consider the Garmin Ais 600. This device allows you to transmit and receive vessel information to and from other AIS-equipped vessels, enhancing your situational awareness and safety on the water. However, before you can use the Garmin Ais 600, you need to install and program it with the Garmin Ais 600 Setup Software 38. In this article, we will show you how to do that step by step.
Garmin Ais 600 Setup Software 38
What is the Garmin Ais 600 Setup Software 38?
The Garmin Ais 600 Setup Software 38 is a software application that you need to install on your PC with a Windows operating system. This software allows you to enter your vessel information into the Garmin Ais 600 device, such as the name, call sign, MMSI number, vessel type, and antenna location. This information is required for the device to transmit and receive AIS data correctly. The Garmin Ais 600 Setup Software 38 also allows you to connect the device to your PC with a USB cable, so you can update the firmware, troubleshoot issues, and perform diagnostics.
How to Install the Garmin Ais 600 Setup Software 38?
To install the Garmin Ais 600 Setup Software 38, you need to have the AIS 600 Setup Disk that came with your device. If you don't have it, you can download it from the Garmin website. Here are the steps to install the software:
Insert the AIS 600 Setup Disk into the CD-ROM or DVD-ROM drive of your computer.
The Installation Wizard for the AIS 600 Setup Software should run automatically. If not, run the Setup.exe file on the disk manually.
Follow the on-screen instructions to install the software. You will need to accept the terms and conditions and choose a destination folder.
Select Finish to complete the installation.
How to Program the Garmin Ais 600 with the Garmin Ais 600 Setup Software 38?
After installing the software, you need to program your vessel information into the Garmin Ais 600 device. Here are the steps to do that:
Select the Search icon in the Windows taskbar and search for AIS 600.
Select AIS 600 Config Software to launch the programming software.
Connect the AIS 600 to your PC with a USB cable.
Connect the power cable to the AIS 600 and to a power source. Make sure that the red wire goes to the positive terminal and both the black and yellow wires go to the negative terminal of the power source.
Select Connect to begin communication between the AIS 600 and your PC.
If the application cannot find the AIS 600, see AIS 600 Not Recognized by Connected Computer for troubleshooting tips.
Enter your vessel information into the fields provided. You will need to enter:
The name of your vessel
Your FCC Call Sign
Your MMSI number (Note: This number can only be entered once. If entered incorrectly, you will need to send your device to Garmin to be reset.)
Your Vessel Type from the drop-down menu
The distance from your vessel's bow to the GA 38 antenna in box A
The distance from your GA 38 antenna to your vessel's stern in box B
The distance from your vessel's port side to your GA 38 antenna in box C
The distance from your vessel's starboard side to your GA 38 antenna in box D
Select Save Data to AIS 600.
Select OK.
How to Use the Garmin Ais 600?
Once you have programmed your vessel information into the Garmin Ais 600 device, you can install it on your boat and connect it to a compatible chartplotter or display device. You will also need a VHF antenna that is connected to both your AIS device and your VHF radio. For more information on how to install and use the Garmin Ais 600, refer to the user manual.
Conclusion
The Garmin Ais 600 is a great device for enhancing your marine navigation and safety. However, before you can use it, you need to install and program it with the Garmin Ais 600 Setup Software 38. This software allows you to enter your vessel information into the device and connect it to your PC for updates and diagnostics. We hope this article has helped you understand how to use this software and get started with your Garmin Ais 600 device.
How to Update the Garmin Ais 600 Firmware with the Garmin Ais 600 Setup Software 38?
One of the advantages of using the Garmin Ais 600 Setup Software 38 is that you can easily update the firmware of your device to get the latest features and improvements. The firmware is the software that runs on your device and controls its functions. To update the firmware, you need to have an internet connection and follow these steps:
Launch the AIS 600 Config Software on your PC.
Connect the AIS 600 to your PC with a USB cable.
Select Connect to begin communication between the AIS 600 and your PC.
Select Update Firmware.
The software will check for available updates and download them automatically.
Wait for the update process to complete. Do not disconnect or turn off your device during this time.
Select OK when prompted.
Your device is now updated with the latest firmware.
How to Troubleshoot and Diagnose the Garmin Ais 600 with the Garmin Ais 600 Setup Software 38?
If you encounter any problems or issues with your Garmin Ais 600 device, you can use the Garmin Ais 600 Setup Software 38 to troubleshoot and diagnose them. The software has a built-in diagnostic tool that can test various aspects of your device, such as the power, GPS, VHF, USB, and NMEA connections. To use the diagnostic tool, follow these steps:
Launch the AIS 600 Config Software on your PC.
Connect the AIS 600 to your PC with a USB cable.
Select Connect to begin communication between the AIS 600 and your PC.
Select Diagnostics.
The software will display a list of tests that you can perform on your device.
Select the test that you want to run and follow the instructions on the screen.
The software will show you the results of the test and indicate if there are any errors or failures.
If there are any errors or failures, refer to the support page for possible solutions or contact Garmin customer service.
Conclusion
The Garmin Ais 600 Setup Software 38 is a useful software application that allows you to install, program, update, troubleshoot, and diagnose your Garmin Ais 600 device. This device is a marine Automatic Identification System (AIS) Class B transponder that enables you to transmit and receive vessel information to and from other AIS-equipped vessels. By using this software, you can ensure that your device is working properly and efficiently, enhancing your marine navigation and safety. We hope this article has helped you understand how to use this software and get the most out of your Garmin Ais 600 device.
How to Connect the Garmin Ais 600 to a Compatible Chartplotter or Display Device?
After programming your vessel information into the Garmin Ais 600 device, you can connect it to a compatible chartplotter or display device that supports AIS data. This will allow you to view the AIS information on your screen and interact with other AIS-equipped vessels. To connect the Garmin Ais 600 to a compatible chartplotter or display device, you need to use the NMEA 2000 or NMEA 0183 network cables that came with your device. Here are the steps to connect the device:
Choose a location for the AIS 600 transceiver box that is dry, secure, and within reach of the power source and the network cables.
Mount the transceiver box using the four screws provided.
Connect the VHF antenna cable to the VHF port on the transceiver box.
Connect the GA 38 antenna cable to the GPS port on the transceiver box.
Connect one end of the NMEA 2000 or NMEA 0183 network cable to the corresponding port on the transceiver box.
Connect the other end of the network cable to your chartplotter or display device according to its instructions.
Connect the power cable to the power port on the transceiver box.
Connect the red wire of the power cable to a fuse holder and then to a switched power source.
Connect both the black and yellow wires of the power cable to a ground source.
How to View and Use AIS Data on Your Chartplotter or Display Device?
Once you have connected the Garmin Ais 600 to your chartplotter or display device, you can view and use AIS data on your screen. The AIS data will show you information about other AIS-equipped vessels in your vicinity, such as their name, position, course, speed, type, and status. You can also use AIS data to avoid collisions, plan routes, request information, send messages, and initiate calls. To view and use AIS data on your chartplotter or display device, you need to follow these steps:
Turn on your chartplotter or display device and select an appropriate map or chart mode.
Select Menu > Settings > AIS (or similar) to customize your AIS settings, such as alarms, filters, symbols, and colors.
Select Menu > AIS List (or similar) to view a list of all AIS targets in your area. You can sort, filter, and select targets from this list.
Select Menu > AIS Target (or similar) to view detailed information about a specific target. You can also request information, send messages, or initiate calls from this screen.
Select Menu > AIS Plot (or similar) to view a graphical representation of all AIS targets in your area. You can zoom in and out, pan, and select targets from this screen.
Conclusion
The Garmin Ais 600 Setup Software 38 is a useful software application that allows you to install, program, update, troubleshoot, and diagnose your Garmin Ais 600 device. This device is a marine Automatic Identification System (AIS) Class B transponder that enables you to transmit and receive vessel information to and from other AIS-equipped vessels. By using this software and connecting your device to a compatible chartplotter or display device, you can view and use AIS data on your screen and enhance your marine navigation and safety. We hope this article has helped you understand how to use this software and get the most out of your Garmin Ais 600 device.
Conclusion
The Garmin Ais 600 Setup Software 38 is a useful software application that allows you to install, program, update, troubleshoot, and diagnose your Garmin Ais 600 device. This device is a marine Automatic Identification System (AIS) Class B transponder that enables you to transmit and receive vessel information to and from other AIS-equipped vessels. By using this software and connecting your device to a compatible chartplotter or display device, you can view and use AIS data on your screen and enhance your marine navigation and safety. We hope this article has helped you understand how to use this software and get the most out of your Garmin Ais 600 device. 4e3182286b